INPUT POWER : 110VAC+/-20%, 220VAC +/- 15%, 50/60Hz, 600W

PRE-HEAT SET POINT

TEMPERATURE RANGE : AMBIENT TO 180 Deg C ( PRE-HEAT MODE)
AMBIENT TO 270 Deg C ( REFLOW MODE)

IDLE TEMP. STABILITY : +/- 3 Deg C AT SITE OF SHAFT THERMOCOUPLE
RAMP RATE RANGE : 0.5 TO 3.5 Deg C/SEC “ DETENT SWITCHABLE”
ALSO STEP FUNCTION “ UNIT HEATS TO SET-POINT AS FAST AS POSSIBLE”

PCB HOLDER :
MAXIMUM PCB SIZE : 270mm X 330mm ( 10.5” X 13”)
AIRSHAFT THROAT : 38mm X38mm STANDARD (1.5” X 1.5”)
50mm X 50mm SPECIAL (2” X 2”)

AIR FLOW RATE : 10 LITRE/MIN (Approx..)

DIMENSIONS : 320 (W) X 115 (H) X 400 (D) mm
12.6” 4.5” 15.7 INCH

POWER CORD : 1.8M

POWER UNIT WEIGHT : 4.6 Kg/ 9.9 lb

PCB HOLDER WEIGHT : 290g/ 0.6lb

FUSE : 3 AMP SLOW BLOW